| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 05080 | |
| Number of page(s) | 9 | |
| Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
| DOI | https://doi.org/10.1051/e3sconf/202340105080 | |
| Published online | 11 July 2023 | |
Calculation of the stress-strain state of monolithic bridges on the action of real seismic impacts
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: ulugbekjuve@mail.ru
To improve the transport infrastructure of the Republic of Uzbekistan, there is a tendency to build monolithic structures of bridges and overpasses. The article presents the calculation of a monolithic bridge on the 1083rd km of the M-39 highway passing through the city of Samarkand. The results of the monolithic bridge calculation on dynamic loads are presented, based on the records of two real seismograms of two dangerous earthquakes registered for a system with a spectral composition: the Gazli (Uzbekistan) and Manjil (Iran) earthquakes. The results of calculations of longitudinal and vertical displacements, and normal stress in the upper and lower parts of the span along the length of the bridge were analyzed. The calculations performed, show that the span structure and bridge supports have an overestimated margin of safety for an 8-point earthquake according to MSK-64. To ensure the guaranteed seismic safety of bridge structures, it is required to conduct design calculations based on a set of records of earthquake events that are close in dominant frequencies to the characteristics of the construction site. This provision must be included in the relevant regulatory documents.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.