Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 03021 | |
Number of page(s) | 9 | |
Section | Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction | |
DOI | https://doi.org/10.1051/e3sconf/202126403021 | |
Published online | 02 June 2021 |
Flow calculations in intake structures of hydropower plants
1 Research Institute of Irrigation and Water Problems, Tashkent, Uzbekistan
2 Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan
* Corresponding author: gazaryan.lex@gmail.com
Research is carried out for design institutes in which the structures of pumping stations are designed. In the regional conditions of the Republic of Uzbekistan, when operating pumping stations, the problem of protecting equipment from pumps and fin is of particular importance, as well as the stability of water supply structures and the creation of favorable hydraulic conditions for supplying flow to the pumps. The main factors in the flow conditions are the calculations associated with suspended particles. The purpose of the research was to study the kinematics of the flow of intake structures in the problem of protecting equipment from pumps and fin. The research subject was to identify the regularities of the operation of intake structures depending on the structure of the flow supply. Experimental methods of hydraulic research of intake structures of pumping stations are used in the work. The analysis of the current state of water supply to the intake structures of pumping stations is carried out based on calculation schemes, which make it possible to establish the nature of the influence of flow parameters and soil particles on this process.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.