E3S Web Conf.
Volume 264, 2021International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|Number of page(s)||11|
|Section||Mechanization, Electrification of Agriculture and Renewable Energy Sources|
|Published online||02 June 2021|
Conditions for bending cotton stalks of a combined aggregation bender and their implementation
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan
* Corresponding author: firstname.lastname@example.org
As the object of the research, the cotton stalk and its physical and mechanical properties, the elastic of the combined aggregate and the spherical disk were accepted. Like many other European countries, our country has also developed minimal, resource-saving and zero technologies for the cultivation of agricultural products, and their technical solutions are being supported and implemented by farmers and clusters. In particular, in the preparation of cotton fields for sowing for the next year in one pass of machinery in cotton growing, the research was conducted on the development of a minimum technology and a combined unit that implements it. In the implementation of this technology, the cotton stalks are tilted to the side furrow in the direction of movement of the aggregate, and the root is laid on the bottom of the furrow with the soil. The bottom layer of the existing pile is then divided into two parts, each of which is rolled over the cotton stalks on the side edges on both sides, where a new pile is formed. Once the aggregate has passed, the existing ridges are replaced by ridges with cotton stalks buried under them, and ridges are formed in place of the existing ridges.
In the study, the angle of the axis of symmetry was determined by the angle of the stalks, and in the laboratory, the amount of force required to bend the stalks was determined using a specially prepared stand.
In the study, the width of the flexible cover is 45 cm, the mounting angle of the straight part of the flexible relative to the direction of movement is 35-450, the radius of curvature should be 100 mm, the mounting height relative to the ridge should be 15 cm, and the shape was determined.
Bending of cotton stalks standing on the ridge in the direction of aggregate movement to the side ridge, digging them with root soil, longitudinal laying at the bottom of this ridge can be done using a spherical disk.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.