Issue |
E3S Web of Conf.
Volume 365, 2023
IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
|
|
---|---|---|
Article Number | 04023 | |
Number of page(s) | 17 | |
Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
DOI | https://doi.org/10.1051/e3sconf/202336504023 | |
Published online | 30 January 2023 |
Pushing soil with combined aggregate spherical disc and burial of stem
“Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, Uzbekistan
* Corresponding author: quziev.ulugbek@bk.ru
As an object of research, the technological process of cutting the roots of the stalks of the pine tree with the soil and placing them on the side together with the spherical disk in the combined aggregate implementation was accepted.
In our republic's cotton cultivation field, the world's latest innovations, including minimal, resource-saving, Strip-till, No-till technologies of soil cultivation and drip irrigation methods, are gradually being introduced. Combined aggregates produced abroad and in our country, designed to perform several technological processes at once, are being supported and introduced by cotton growing clusters. We found it necessary to bring a combined aggregate that prepares new sedges and sedges in the fields with sedges. During the movement of the aggregate in the sedge field, the sedges of the sedge are first tilted to the side of the sedge, and the roots are trimmed with soil and placed at the bottom of the sedge. Then, the lower layer of the bush is divided into two parts, it is turned over the stalks laid on the sides, and new bushes are formed in that place. And in the place of existing puss, new furrows are formed. The research was carried out using methods and tools for measuring angles and distances and optimizing parameters using the mathematical planning method of multifactorial experiments. The study's results determined that the diameter of the spherical disk is 510 mm, the radius of curvature is 540 mm, and the installation angles relative to the direction of movement and the vertical should be 30-32° and 20°, respectively. The research results showed that it is possible to perform the technological processes of cutting the layer of the pistachio root with spherical disks and throwing it to the middle of the side.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.