| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04055 | |
| Number of page(s) | 7 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404055 | |
| Published online | 02 June 2021 | |
Thermal regime for convective drying products
Bukhara branch of the Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Bukhara, Uzbekistan
* Corresponding author: shavkat-imomov@rambler.ru
In the work, the specified features of the temperature regime in the drying chamber showed that when the coolant moves in the chamber, both the temperature and humidity regime of the air and the temperature and drying rate of the product change, and the drying rate is almost proportional to the increase in air humidity. Based on the studies carried out, simplifications were obtained in describing the drying process, which makes it possible to more reasonably carry out engineering calculations in the design of the dryer, in particular, to set the input and output air humidity, to determine the length (or height) of the drying chamber.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.