Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 04069 | |
Number of page(s) | 6 | |
Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
DOI | https://doi.org/10.1051/e3sconf/202126404069 | |
Published online | 02 June 2021 |
Calculation of the power of thermal energy consumed for heating the reactor of a bioenergy plant
1 Bukhara branch of the Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Bukhara, Uzbekistan
2 Bukhara engineering-technological institute, Bukhara, Uzbekistan
3 Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan
* Corresponding author: shavkat-imomov@rambler.ru
The issues of calculating the power of thermal energy consumed for heating biomass in the reactor of a bioenergy plant are considered. Based on the Fourier heat equation, a solution for the axisymmetric cylindrical problem under boundary conditions of the first kind is obtained, and the power of additional heat sources in a cylindrical biogas reactor is calculated. The influence of the height of the bioreactor and the temperature difference of the biomass on the power consumption of an additional source of thermal energy is analyzed
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.