| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04078 | |
| Number of page(s) | 8 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404078 | |
| Published online | 02 June 2021 | |
Mathematical model for producing machine parts
Tashkent State Technical University named after I.A. Karimov, Tashkent, Uzbekistan
* Corresponding author: kamolxon.karimov@gmail.com
In the article, the object of research is the development of a technology for improving the operational properties of cast parts from steel 45, obtained by the method of electroslag remelting. Based on the research results, the modes of heat treatment of the shaft-gear part in an aqueous medium water-oil, heat treatment to increase the service life of the product, and energy-saving melting technology by the method of electroslag remelting were developed. Particular attention is paid to the development and analytical implementation of the mathematical model of the developed technologies by the methods of linear algebra by drawing up the Lagrange interpolation polynomial. Functional dependencies have been obtained for determining the amount of oxygen in the melt depending on the diameter of the electrode and the aluminum content in this electrode for any diameter of the mold, the hardness of the shaft surface depending on its diameter, the oxygen content (amount) in the melt depending on the aluminum content in the electrode for different mold diameters. Based on the developed and analytically implemented mathematical models of the investigated technological process, it seems possible to simplify experimental studies. In other words, based on analytical studies, it is possible to predict the results of subsequent experiments. Based on the developed and analytically implemented mathematical models of the investigated technological process, it seems possible to simplify experimental studies. In other words, based on analytical studies, it is possible to predict the results of subsequent experiments.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.