Open Access
| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04078 | |
| Number of page(s) | 8 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404078 | |
| Published online | 02 June 2021 | |
- Trubilov A.K., Xitryuk V.A. Automotive operating materials, Minsk, (2012) [Google Scholar]
- Latash Y.V., Medovar B.I. Electroslag remelting, Moscow, (1970) [Google Scholar]
- Zvonarev S.V. Fundamentals of Mathematical Modeling, Yekaterinburg, (2019) [Google Scholar]
- Karimov K., Akhmedov A., Kushimov B., Yuldoshev B. Justification, development of a new technology and design for drying seeds of desert fodder plants. IOP Conf. Series: Materials Science and Engineering 883 (2020), 012107, DOI: 10.1088/1757- 899X/883/1/012107. [CrossRef] [Google Scholar]
- Karimov K.A., Akhmedov A. On perspective scientific direction in the theory of mechanisms and machines based on innovative technology. Theoretical and engineering solutions, Technical science and innovation, 3, pp. 199–216, (2020) [Google Scholar]
- Grachev V., Turakhodjaev N. Influence of liquid aluminum alloy treatment at temperatures up to 2000 0C in terms of the alloy structure and gas aluminum oxides content, International Journal of Mechanical Engineering and Technology, 9(7), pp. 489–495, (2018) [Google Scholar]
- Nodir, Turakhodjaev, Shukhrat, C., Jamaliddin, K., Jaloliddin, E., Kulmukhammad, C. Ways to increase the strength of the surface of the parts, Journal of Critical Reviews, 2020, 7(11), pp. 380–386 [Google Scholar]
- Wang Y., Zhang S., Wu, R., Liu, M., Mardonakulov, S. Concurrently improving uniform elongation and strength of ultrafine-grained Al-2Li alloy, Materials Science and Engineering p. 792, (2020) [Google Scholar]
- Turakhodjaev N., Tashbulatov, S., Zokirov, R., Tursunbaev, S., Baydullaev, A. Studying the scientific and technological bases for the processing of dumping copper and aluminum slags, Journal of Critical Reviews 7(11), ISSN- 2394-5125, (2020) http://dx.doi.10.31838/jcr.07.11.79 [Google Scholar]
- Nodir T., Shukhrat C., Nargiza S., Kulmukhammad, C. Ways to increase the strength of shaftgear teeth working in a highly abrasive grinding environment, Journal of Critical Reviews, 7 (7), pp. 904–907, (2020) [Google Scholar]
- Wang Y., Zhong F., Wu R., Li X., Zhang M. High-strength, ductility and modulus Al- Li/B4C composite with near nanostructure produced by accumulative roll bonding, Journal of Alloys and Compounds, 834, 155105 (2020) [Google Scholar]
- Nodir, T., Shukhrat, C., Jamaliddin, K., Jaloliddin, E., Kulmukhammad, C. Ways to increase the strength of the surface of the parts//Journal of Critical Reviews, 2020, 7(11), pp. 380–386 [Google Scholar]
- Dyudkin D.A., Kisilenko V.V. Proizvodstvo stali. Tom 1. Protsessi viplavki, vnepechnoy obrabotki i neprerivnoy razlivki, Smelting, Out-of-Furnace Processing and Continuous Casting Processes, (2008) [Google Scholar]
- Voskoboynikov V.G., Kudrin V.A., Yakushev A.M. General metallurgy, 768, pp. 253, (2005) [Google Scholar]
- Voskoboynikov V.G., Kudrin V.A., Yakushev A.M. General metallurgy, 768 p. 253, (2002) [Google Scholar]
- Krilov S.A., Evgenov A.G., Makarov A.A. Electroslag pressure furnace DESHP-0.1: development and development prospects, (2016) [Google Scholar]
- Krilov S.A., Evgenov A.G., Makarov A.A., Tonisheva O.A. Ingot electroslag remelting under pressure, p. 323, (2017) [Google Scholar]
- Kazachkov E.A., Chepurnoy A.D., Medovar L.B., Saenko V.Y. Modern electroslag technology in special electrometallurgy, Kiev, (2003) [Google Scholar]
- Pyatigin D.A., Chumanov I.V. On the issue of obtaining large forging ingots from high-alloy steels and alloys by the ESR method. Kiev, (2011) [Google Scholar]
- Krilov S.A., Makarov A.A., Tonisheva O.A. Reducing the content of non-metallic inclusions in corrosion-resistant nitrogen-containing steel, (2017) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.