| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04081 | |
| Number of page(s) | 9 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404081 | |
| Published online | 02 June 2021 | |
Wear issues of pumping units
1 Scientific and Technical Centre of JSC Uzbekenergo, Tashkent, Uzbekistan
2 Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan
3 Karshi branch of the Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Uzbekistan
* Corresponding author: oybek.ishnazarov@gmail.com
The article presents the possibility of increasing the service life of pumping units. Particular attention is paid to the regulation of the speed of rotation of the pumping unit. There are some assumptions in the mathematical model that do not affect the final result. The factors influencing the operating mode are given. It is indicated that the speed of rotation of the pump shaft significantly affects the wear resistance of the pump blades. Thus, the regulation of the pump rotation speed will rationally increase its service life.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.