| Issue |
E3S Web of Conf.
Volume 365, 2023
IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 8 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202336504005 | |
| Published online | 30 January 2023 | |
Assessment of effect of lining material on energy efficiency of starting up ball mills
1 Institute of Energy Problems of the Academy of Sciences of the Republic of Uzbekistan, Tashkent, Uzbekistan
2 “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research university, Tashkent, Uzbekistan
* Corresponding author: hakimmuratov@mail.ru
The article presents the possibility of increasing the service life of mill lining. Special attention is paid to the use of rubber linings for mills. A mathematical model of the asynchronous motor of ore grinding mills has been developed, i.e., the moment of resistance is shock. A system of equations for a synchronous motor of a mill plant for the d and q axes is described. Based on mathematical modeling of mill plant operating modes, it was determined that the corrosion coating prolongs the mill's service life, and the transition time is reduced to 10%.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.