E3S Web Conf.
Volume 264, 2021International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|Number of page(s)||9|
|Section||Engineering Materials Science, Intelligent Transport Systems and Transport Logistics|
|Published online||02 June 2021|
Structure and properties of the modified diffusion nitride-oxide surface layer
Karshi Engineering Economic Institute, Karshi, Uzbekistan
* Corresponding author: email@example.com
To combine the processes of gas nitriding and oxidation in water vapor, the effects of the atmospheric nitrogen potential in dissociated ammonia on the formation of surface diffusion nitride phases are studied.
Modification of the surface nitride layer with oxygen was carried out by oxidation of the nitride zone at the second stage of obtaining an oxycarbonitride layer.
The corrosion and wear-resistant properties of the nitride-oxide layer t of the lowest nitride layer are investigated, depending on the phase changes in the nitride layer after oxidation. The distributions of the elements in the nitride-oxide layer are determined, and the nature of the formation of the modified surface layer under the combination of gas nitriding with subsequent oxidation in water vapor is established.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.