E3S Web Conf.
Volume 264, 2021International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|Number of page(s)
|Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
|02 June 2021
Composite polypropylene polymer materials that work in contact with raw cotton
1 Karshi Engineering-Economic Institute, Karshi, Uzbekistan
2 State Unitary Enterprise “Fan va tarakkiyot” at Tashkent state technical university named after Islom Karimov, Tashkent, Uzbekistan
* Corresponding author: firstname.lastname@example.org
Physicomechanical and tribotechnical properties of structural composite materials based on thermoplastic polymer and organomineral ingredients operating under friction and wear conditions during contact with pulp (raw cotton) have been investigated. The regularities of changes in the physical, mechanical and tribotechnical properties of structural composite materials during contact interaction with raw cotton were determined, the dependence of their properties on the type and content of graphite, mineral and fibrous fillers in structural composite materials was studied. It has been established that the nature and structure of fillers has a certain effect on the physical and mechanical properties of composite materials based on polypropylene. At the same time, fiber-filled compositions have the highest mechanical strength. It was also found that when mineral fillers are introduced into composite polymer materials, their coefficient of friction with raw cotton increases significantly, while the wear rate decreases, except for fillers with a plate structure (kaolin, talc), when used, a decrease in the coefficient of friction is observed. The introduction of carbon-graphite fillers into the composition of composite materials leads to a significant decrease in the coefficient of friction, temperature and static electricity charge in the friction zone with raw cotton. The introduction of fillers with a fibrous structure leads to a significant decrease in the rate of wear of the composites. It provides high strength and resistance of the material under thermomechanical action. Effective compositions of structural composite materials for work under conditions of contact interaction with fibrous mass have been developed, and their physical, mechanical and tribotechnical properties have been investigated.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.