| Issue |
E3S Web Conf.
Volume 267, 2021
7th International Conference on Energy Science and Chemical Engineering (ICESCE 2021)
|
|
|---|---|---|
| Article Number | 01045 | |
| Number of page(s) | 4 | |
| Section | Energy Development and Utilization and Energy-Saving Technology Application | |
| DOI | https://doi.org/10.1051/e3sconf/202126701045 | |
| Published online | 04 June 2021 | |
Study on the gas emission width of coal seam pressure released by goaf in the deep mine
1 China Coal Technology and Engineering Group Chongqing Research Institute, Chongqing, China
2 State Key Laboratory of Gas Disaster Monitoring and Emergency Technology, Chongqing, China
The technology of driving along goaf has been widely used in the prevention of high ground stress and coal-gasoutburst in coal mining in our country. In this paper, the 11-2 Coal Seam of zhujixi coal mine is taken as the research object. Based on the test of drilling cuttings and residual gas content at different depths of solid coal at the goaf side and the research on the distribution law, it is concluded that the effective pressure relief drainage belt width at the goaf side of 11-2 Coal Seam after mining is 29m. Field practice has been carried out in the adjacent working face. The results show that the predicted indexes measured during the coal roadway driving period do not exceed the specified critical value, which verifies the rationality of the width of the discharge zone. The results provide a theoretical support for the reasonable layout of the continuous working face, improve the driving speed of the coal roadway, reduce the cost of gas control, improve the economic benefits of the mine, and ensure the safety production of the mine.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.