Issue |
E3S Web Conf.
Volume 267, 2021
7th International Conference on Energy Science and Chemical Engineering (ICESCE 2021)
|
|
---|---|---|
Article Number | 02006 | |
Number of page(s) | 4 | |
Section | Environmental Chemistry Research and Chemical Preparation Process | |
DOI | https://doi.org/10.1051/e3sconf/202126702006 | |
Published online | 04 June 2021 |
Investigation on the feasibility of resource utilizing drinking water treatment sludge as a pozzolan to prepare cement-based materials
1 XAUAT UniSA An De College, Xi’an University of Architecture and Technology, Xi’an, Shaanxi, China
2 School of Environmental and Municipal Engineering, Xi’an University of Architecture and Technology, Xi’an, Shaanxi, China
a email: jiaqiong@xauat.edu.cn
c email: jingyang2020@xauat.edu.cn
* Corresponding author:
b email: lujinsuo@xauat.edu.cn
The characteristics of four kinds of sludge obtained from different drinking water treatment plants in Australia and China were contrastively analyzed in this study using x-ray fluorescence, scanning electron microscopy, and x-ray diffraction. The conducted SAI test determined the pozzolanic reactivity of drinking water sludge ash (DWSA), which was derived from the grinding and calcination of drinking water treatment sludge (DWTS). The results indicated that the Al2O3 and SiO2 were the main components of DWTS, and the main crystalline minerals in DWTS were quartz, kaolinite, and aluminum sulfate hydroxide hydrate, which can be transformed into the reactive amorphous state after calcination at 800 ºC. Also, the SAI index of DWSA-derived mortar samples met the requirement, indicating a satisfying pozzolanic reactivity. Therefore, the DWTA was possible to be recycled as a pozzolan in cement-based materials.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.