Issue |
E3S Web Conf.
Volume 267, 2021
7th International Conference on Energy Science and Chemical Engineering (ICESCE 2021)
|
|
---|---|---|
Article Number | 02064 | |
Number of page(s) | 6 | |
Section | Environmental Chemistry Research and Chemical Preparation Process | |
DOI | https://doi.org/10.1051/e3sconf/202126702064 | |
Published online | 04 June 2021 |
Study on Technological Process Innovation of Non-Cyanide Leaching
Metallurgical Laboratory Branch of Shandong Gold Mining Technology Co., Ltd. Laizhou City, Shandong Province, China 261400
Nowadays, there are many gold leaching processes, and the dominant one is cyanidation, but the virulence of cyanidation seriously endangers the environment and human health. In order to reduce environmental pollution and improve the recovery rate of gold, metallurgical workers put forward a variety of new gold leaching methods, which can be roughly divided into two types: one is to develop pretreatment technology on the basis of traditional cyanidation method; The other is non-cyanide leaching of gold. Based on the existing Non-Cyanide leaching technology, this paper puts forward the process innovation of Non-Cyanide leaching technology, thiourea method and dilute nitric acid pre-oxidation treatment process. The thiourea non-cyanide leaching system was investigated. According to the leaching situation of gold and silver in raw ore, the innovative scheme of gold and silver leaching technology was selected. Compared with other treatment methods, thiourea method and dilute nitric acid pre-oxidation treatment technology overcome the danger of high pressure, and the nitrogen oxide gas produced in the dilute nitric acid oxidation process can be recycled, which basically does not pollute the environment.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.