| Issue |
E3S Web Conf.
Volume 271, 2021
2021 2nd International Academic Conference on Energy Conservation, Environmental Protection and Energy Science (ICEPE 2021)
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 5 | |
| Section | Environmental Materials and Solid Waste Recycling Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202127104005 | |
| Published online | 15 June 2021 | |
Preparation of polymeric aluminum ferric sulphate from waste residue of aluminum industry
Guangxi Vocational & Technical Institute of Industry, Nanning, China, 530001
a Corresponding author: juyanmei@foxmail.com
Polymeric aluminum ferric sulphate(PAFS) was prepared from high-sulfur bauxite flotation tailings and red mud by roasting, acid leaching and polymerization. The effects of leaching temperature, leaching time, liquid-solid ratio on the leaching rate of Al3+ and Fe3+were investigated. The optimal leaching conditions are as follows: leaching temperature 100℃, leaching time 90 min, sulfuric acid concentration 4.5mol/L and liquid-solid ratio 5 mg/L. Infrared spectroscopy and X-ray diffraction analysis was carried out on the PAFS prepared under the optimum process parameters. The characterization of PAFS shows that the synthesized PAFS had polymeric aluminum, iron and hydroxyl structures. Wastewater disposal test of synthetic PAFS shows that the removal rates of COD, turbidity and chromaticity are 45.61%, 75% and 94.18%, respectively.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.