Open Access
Issue |
E3S Web Conf.
Volume 271, 2021
2021 2nd International Academic Conference on Energy Conservation, Environmental Protection and Energy Science (ICEPE 2021)
|
|
---|---|---|
Article Number | 04005 | |
Number of page(s) | 5 | |
Section | Environmental Materials and Solid Waste Recycling Technology | |
DOI | https://doi.org/10.1051/e3sconf/202127104005 | |
Published online | 15 June 2021 |
- Dongyang Ma, Zhendong Wang, Min Guo, Mei Zhang, Jingbo Liu. Feasible conversion of solid waste bauxite tailings into highly crystalline 4A zeolite with valuable application[J]. Waste Management, 2014, 34(11). [Google Scholar]
- Khairul M.A., Zanganeh J., Moghtaderi, B.. The composition, recycling and utilisation of Bayer red mud [J]. Resources, Conservation and Recycling, 2018, 141:483–498. [CrossRef] [Google Scholar]
- Yang H.Z., Chen C.P., Pan L.J., et al. Preparation of double-layer glass-ceramic/ceramic tile from bauxite tailings and red mud[J]. Journal of the European Ceramic Society, 2009, 29(10): 1887–1894. [CrossRef] [Google Scholar]
- Yang H.Z., Chen C.P., Sun H.W., et al. Influence of heat-treatment schedule on crystallization and microstructure of bauxite tailing glass-ceramics coated on [Google Scholar]
- Yan Zuxing. The application and research of cement-red mud concrete. Concrete, 2000 (10):18–20(in Chinese). [Google Scholar]
- Mangen Mu, Xiaozhen Gao, Taoming Guo, Xinping Hu. Experimental Study of Goaf Filling Materials Based on Red Mud[J]. IOP Conference Series: Materials Science and Engineering, 2018, 301(1). [Google Scholar]
- Yong Guang Fang, Zheng Ke Chen, Yu Qian. Red Mud Powders Applied on Filling Rubber Composite Material[J]. Advanced Materials Research, 2013, 27–35. [Google Scholar]
- Li Y., Ren Y., Pei D., et al. Mechanism of pore formation in novel porous permeable ceramics prepared from steel slag and bauxite tailings[J]. ISIJ International, 2019: ISIJINT-2018-782. [Google Scholar]
- Shen X.J., Qiu G.B., Yue C.S., et al. Multiple copper adsorption and regeneration by zeolite 4A synthesized from bauxite tailings[J]. Environmental Science and Pollution Research, 2017, 24(27): 21829–21835. [CrossRef] [Google Scholar]
- A. Cruceanu, R. Zavoianu, O. D. Pavel, M. Florea, L. Mara. Alternative valorization of red mud waste as functional materials with catalytic activity for sulfide oxidation in wastewater[J]. International Journal of Environmental Science and Technology, 2018, 15(4). [Google Scholar]
- Yanju Liu, Ravi Naidu, Hui Ming. Red mud as an amendment for pollutants in solid and liquid phases[J]. Geoderma, 2011, 163(1). [Google Scholar]
- Novais Rui M., Carvalheiras Joao, Seabra Maria, P., Pullar Robert C., Labrincha Joao A.. Innovative application for bauxite residue: Red mud-based inorganic polymer spheres as pH regulators.[J]. Journal of hazardous materials, 2018, 358. [Google Scholar]
- Tian Baozhen, Zhang Yun. The preparation and application of Al-Fe co-polymer inorganic coagulant[J]. Industrial water treatment, 1998, 18(1): 17–19. (in Chinese) [Google Scholar]
- Zhu G., Zheng H., Chen W., et al. Preparation of a composite coagulant: Polymeric aluminum ferric sulfate (PAFS) for wastewater treatment[J]. Desalination, 2012, 285: 315–323. [CrossRef] [Google Scholar]
- Wang W.H., Liu Q.W., Ning, Z.W.. Preparation of polymeric aluminum ferric sulphate from industryial dross. Industrial Water Treatment, 2000. [Google Scholar]
- Parker D.R., Bertsch P.M.. Identification and quantification of the“Al3” tridecameric aluminum polycation using ferron[J]. Environmental Science & Technology, 1992, 26(5): 908–914. [CrossRef] [Google Scholar]
- Zhao R., Liu Z.A., Chang Y., et al. Preparation of PAFS Cationic Flocculant in Various Fe3+/Al3+ Molar Ratio [J]. Journal of Inner Mongolia Normal University(Natural Science Edition), 2011, 40(5): 508–511 (in Chinese). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.