Issue |
E3S Web Conf.
Volume 273, 2021
XIV International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2021”
|
|
---|---|---|
Article Number | 04010 | |
Number of page(s) | 6 | |
Section | Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202127304010 | |
Published online | 22 June 2021 |
Numerical simulation of the heat-relief capacity of an axisymmetric body in a gas flow
1 Southern Federal University, Nekrasovskiy, 44, Taganrog, 347900, Russia
2 Politechnical Institute (branch) of DSTU in Taganrog, Petrovskaya str., 109a, Taganrog, 347900, Russia
* Corresponding author: poklonskaya.maya@mail.ru
The paper describes a computational experiment and presents the results of numerical modeling of an axisymmetric body with an optimized shape with a minimum aerodynamic drag force as a heat sink in a convective gas flow. The resulting optimized body shape coincides with streamlines, which is the main advantage, since no separation of the flow from the surface is observed in the flow around. Thus, the entire surface area will be the effective surface area of the heat sink, unlike other known body shapes, due to which the temperature of the heat-loaded element placed in the center of the heat sink will decrease.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.