| Issue |
E3S Web Conf.
Volume 273, 2021
XIV International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2021”
|
|
|---|---|---|
| Article Number | 07011 | |
| Number of page(s) | 8 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202127307011 | |
| Published online | 22 June 2021 | |
Investigation of the reasons for the failures of the tractor microclimate system
1 Don State Technical University, 1, Gagarina sq., 344003, Rostov-on-Don, Russia
* Corresponding author: iluhan_markvo@mail.ru
In the process of performing technological operations, any agricultural machinery is exposed to a large number of changing factors. The result of performing technological operations, i.e. the assessment of performance indicators, in most cases, is performed by the organoleptic method, which is characterized by a significant error (up to 40%) and labour intensity. The use of automatic means of control gives an undoubted advantage in convenience of use and in speed of obtaining results. Given the complexity and labour intensity of assessing the quality indicators of agricultural machinery, even partial automation of this process in practice gives a significant (tens of percent) economic effect and becomes the basis for the formation of digital agriculture. We have analyzed the existing methods for controlling the quality indicators of technological operations using the example of the grain harvesting process. In particular, the possibilities of improving the methods of monitoring the quality indicators of the work of the combine harvester are considered.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.