Issue |
E3S Web Conf.
Volume 274, 2021
2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE – 2021)
|
|
---|---|---|
Article Number | 03017 | |
Number of page(s) | 10 | |
Section | Building Constructions, Buildings and Structures | |
DOI | https://doi.org/10.1051/e3sconf/202127403017 | |
Published online | 18 June 2021 |
Structural solution of the horizontal joint of floor slabs in girderless frame
Kazan State University of Architecture and Engineering, 420043 Kazan, Russia
* Corresponding author: yul.mironova2018@mail.ru
Despite the widespread use of monolithic construction, precast concrete remains in demand in the construction of residential and administrative buildings. Regardless of the advantages in technology and the quality of work, it is necessary and appropriate to modernize the existing design solutions, which allows you to simplify and speed up the technological operations during construction. Moreover, in the construction of complex nodes and joints, the qualification of workers is important, so simplifying the work without losing the quality of construction and ensuring strength, stability and durability is an important task. This problem can be solved by using modern embedded parts in the joints that do not require welding and other complex technological operations. In this paper, a constructive solution of the horizontal joint of the floor slabs located in the zone of action of minimal forces is proposed on the example of a girderless frame. The purpose of the study is to determine the stress-strain state of the proposed structural solution of the horizontal joint of floor slabs using loopshaped embedded parts «PFEIFER» and to develop recommendations for determining the shear compliance. Based on the analysis of the results of numerical modeling, the features of the stress-strain state of the joint during shear operation are revealed. The results obtained can be used in the design of buildings with precast-monolithic ringless frames, in the modernization of existing standard solutions of precast-monolithic frames, as well as other load-bearing systems made of precast concrete.
Key words: Multi-storey buildings / girderless frame / horizontal joint of floor slabs / loop-shaped embedded parts / welded joint / shear compliance
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.