| Issue |
E3S Web Conf.
Volume 274, 2021
2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE – 2021)
|
|
|---|---|---|
| Article Number | 07001 | |
| Number of page(s) | 10 | |
| Section | Energy Efficiency and Thermal Protection of Buildings | |
| DOI | https://doi.org/10.1051/e3sconf/202127407001 | |
| Published online | 18 June 2021 | |
Research of thermal performance properties of the wall construction products made of materials using heat power engineering waste
Kazan State University of Architecture and Engineering, 420033 Kazan, Russia
* Corresponding author: dmitriy.kraynov@gmail.com
A technology for the utilization of technogenic waste from the oil and gas industrial complex (sulfur) and ash and slag waste from the combined heat and power plant for the manufacture of thermal insulation material with high strength and performance properties has been developed. A technological scheme is proposed. The optimal parameters and composition of the obtained thermal insulation materials have been determined. A numerical method for determining the thermal conductivity coefficient of a building product based on the calculation of a stationary temperature field is considered. The dependence of the thermal conductivity coefficient of a block on the value of the thermal conductivity coefficients of the base material and filler is obtained. The efficiency of block insulation has been determined. This method can be used at the design stage of wall products, varying their overall dimensions, the geometry of the slots and also using various thermal insulating materials as a void filler.
Key words: Thermal conductivity coefficient / wall block / thermal insulation material / temperature field
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.