E3S Web Conf.
Volume 279, 2021III International Conference “Energy Efficiency and Energy Saving in Technical Systems” (EEESTS-2021)
|Number of page(s)||13|
|Section||Modern Energy Efficient Automation Technology|
|Published online||01 July 2021|
Estimation of 500 kV power transmission line parameters with PMU
North Caucasian Federal University, Russia, Stavropol
* Corresponding author: email@example.com
This work is devoted to the research of the real-time estimation of 500 kV power transmission lines parameters with PMU based on the solution of the optimization problem of minimizing the root-mean-square deviations of the specific line parameters or the sum of the modules of the correlation coefficients between the specific parameters and the sum of the squares of the voltages or currents measured at the ends of the line. Independent optimization variables are the correction factors of the measuring systems of currents and voltages. Based on an artificially simulated PMU dataset with specified Gaussian noise and systematic errors, it is shown that the use of correlation coefficients in the objective function is more effective than standard deviations. All 5 estimated coefficients turned out to be closer to the reference values. The results of calculations are obtained from the data of real PMUs for an operating 500 kV line with a length of 504.6 km. The deviation of the specific capacitive conductivity from the nominal value is 0.13%, compared with - 0.29% when using the sum of squares of deviations as an objective function.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.