| Issue |
E3S Web Conf.
Volume 281, 2021
IV International Scientific Conference “Construction and Architecture: Theory and Practice of Innovative Development” (CATPID-2021 Part 1)
|
|
|---|---|---|
| Article Number | 09012 | |
| Number of page(s) | 5 | |
| Section | Natural and Technospheric Safety. Reliability, Efficiency and Safety of Objects of Fuel and Energy and Construction Complexes | |
| DOI | https://doi.org/10.1051/e3sconf/202128109012 | |
| Published online | 02 July 2021 | |
Solutions to reduce dust emissions mass into urban air in aerated concrete production
Don State Technical University, 344000, Rostov-on-Don, Russia
* Corresponding author: tatkondr@rambler.ru
Low fractional efficiency of dust separation equipment used in dust cleaning systems in the production of building materials remains one of the main causes of dust emissions with a high content of РМ10 and РМ2,5 fine particles in the atmospheric air, both on the industrial sites territory, and on the borders of sanitary protection zones. The wide range of building materials produced by the construction industry with different raw materials, requires a tailor-made approach to develop the solutions to reduce dust emissions. This approach is primarily based on the properties of dust emitted during the production process.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.