Reducing the soil structure destruction along the rut and increasing the traction properties of the tractor by using the rear grouser of the track link

¹ FSBEI HE South Ural State Agrarian University, Chelyabinsk, Russia
² FSAEI HE South Ural State University (National Research University), branch in the Miass, Russia
³ FSBEI HE Ural State Agrarian University, Yekaterinburg, Russia

^* Corresponding author: kozhanoww@mail.ru

Abstract

The traditionally used mixed grouser of the metal track link causes a decrease in the traction qualities of the agricultural tractor. The use of a rear grouser on the track link, in our opinion, will significantly improve the traction properties of an agricultural tractor with a metal track and reduce the soil destruction. When the rear grouser is immersed in the soil, an additional horizontal deformation of the soil occurs, which changes the law of horizontal deformation distribution along the support surface of the trackdrive, which ensures the alignment of the link shares in the implementation of the tangential traction force. This leads not only to a reduction in the trackdrive skidding, but also to a reduction in tractor rolling losses. Comparative tests of the T-4A tractor with a serial track, and a track on which links the front grousers were removed showed that the maximum traction power increases from 59 to 65 kW, the skidding with a hook load of 40 kN decreases from 14.6 to 9.4%, the rolling resistance coefficient decreases from 0.093 to 0.072, eliminates the “scissors” effect, which will reduce the number of erosive-dangerous particles in the track trace to 30...40%, which is 5.6...4.25 times less than in agricultural tractors with a mixed grouser, which confirms the effectiveness of their use.