Issue |
E3S Web Conf.
Volume 288, 2021
International Symposium “Sustainable Energy and Power Engineering 2021” (SUSE-2021)
|
|
---|---|---|
Article Number | 01110 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202128801110 | |
Published online | 14 July 2021 |
Simulation Model of an Asynchronous Machine with Wound Rotor in Matlab Simulink
1 Sukhoi State Technical University of Gomel, Automation and Information Systems Faculty, 246746, Prospect Octiabria, 48, Gomel, Republic of Belarus
2 Kazan State Power Engineering University, 420066, ul. Krasnoselskaya 51, Kazan, Russia
* Corresponding author: dr-aed@yandex.ru
The article presents a three-phase mathematical model of asynchronous machine with wound rotor based on differential equations. The equations are resolved with respect to the derivatives of flux linkages. The description of the computer program in the Matlab Simulink that implements the model and allows to simulate transients of the asynchronous motor is present. A simulation model of a three-phase asynchronous machine with wound rotor, which allows to investigate static and dynamic operating ranges when power converters are connected to the rotor circuit has been obtained. The results of approbation of the obtained simulation model in the Matlab Simulink environment and experimental research of asynchronous engine with wound rotor, driving into the asynchronous-valve cascade, are presented. The results of experimental studies of the asynchronous machine under sinusoidal voltage using a stand based on the asynchronous-valve cascade, and comparison of the oscillograms obtained with simulation results of the proposed model are presented. The comparison of experimental and calculated oscillograms of the current of the investigated asynchronous motor can be concluded on satisfactory accuracy of the proposed model and the possibility of its application for modeling and analysis of asynchronous electric drives.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.