| Issue |
E3S Web Conf.
Volume 289, 2021
International Conference of Young Scientists “Energy Systems Research 2021”
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 7 | |
| Section | Development and Operation of Energy Systems | |
| DOI | https://doi.org/10.1051/e3sconf/202128901001 | |
| Published online | 13 July 2021 | |
A methodical approach and computer programs to determine the power of active harmonic filters
1
Melentiev Energy Systems Institute SB RAS, Irkutsk, Russia
2
Irkutsk National Research Technical University, Irkutsk, Vietnam
* Corresponding author: kovernikova@isem.irk.ru
Poor power quality creates big problems. With the poor power quality, the service life of the equipment is reduced. In connection with the creation and development of intelligent electrical power systems and the digital economy, the requirements for the power quality are increasing. Active harmonic filters began to used to solve problem with the poor power quality. The paper presents a methodical approach and computer programs for determining the power of the active harmonic filter. The power supply system of the Vietnamese coal sorting plant is considered to develop the methodical approach. The results of measurements of the power quality indices and the results of calculating the parameters of the modes of the electrical network of the plant at the fundamental frequency were used. To process a large amount of measured information, the special computer program was developed. On the basis of the methodical approach, the results of measurements of the power quality indices and the computer complex “Stationary permissible optimal mode”, the algorithm and the computer program have been developed to calculate the power of the active harmonic filter. The power of the active harmonic filter for the coal sorting plant was determined with the help of this program.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.