| Issue |
E3S Web Conf.
Volume 292, 2021
2021 2nd International Conference on New Energy Technology and Industrial Development (NETID 2021)
|
|
|---|---|---|
| Article Number | 03056 | |
| Number of page(s) | 5 | |
| Section | Environmental Sustainable Development and Industrial Transformation | |
| DOI | https://doi.org/10.1051/e3sconf/202129203056 | |
| Published online | 09 September 2021 | |
Response Surface Methodology of Alcohol Production from TWR Sugar using Saccharomyces cerevisiae TISTR 5339
1 Expert Centre of Innovative Industrial Robotics and Automation, Thailand Institute of Scientific and Technological Research (TISTR), Khlong Ha, Khlong-Luang, Pathumthani, 12120, Thailand
2 Biodivesity Research Centre, Thailand Institute of Scientific and Technological Research (TISTR), Khlong Ha, Khlong-Luang, Pathumthani, 12120, Thailand
* Corresponding author’s e-mail: athitan@tistr.or.th
The aim of this research was to develop technique to produce alcohol from Thai white rice (TWR) using Saccharomyces cerevisiae TISTR 5339. TWR sugar was produced from TWR with Amylomyces rouxii TISTR 3182. Response surface methodology (RSM) was applied for investigating the experimental design for production the alcohol. There were 20 experiments involving the three investigated variables of Saccharomyces cerevisiae TISTR 5339 to amount of TWR sugar ratio, concentration of TWR sugar (% Brix) and retention time of fermentation that were studied on alcohol to optimize the condition for production the alcohol. Design of experiment was performed by application of 5-level-3-factors central composite design in order to study the optimum condition for production the alcohol. The investigated results showed that the optimum condition was 4.0 ml of Saccharomyces cerevisiae TISTR 5339 amount to 100 ml of TWR sugar amount, 20%Brix (concentration of TWR sugar) and 7 days of fermentation time.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.