Issue |
E3S Web Conf.
Volume 303, 2021
The 10th Anniversary Russian-Chinese Symposium “Clean Coal Technologies: Mining, Processing, Safety, and Ecology” 2021
|
|
---|---|---|
Article Number | 01041 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/202130301041 | |
Published online | 17 September 2021 |
Recovery of valuable components from coal consumption waste
T.F. Gorbachev Kuzbass State Technical University, 650000, Russian Federation
* Corresponding author: ctg.htnv@kuzstu.ru
Today, more than 56% of all coal in Russia is mined in Kuzbass. As a result of its burning, about half a million ash and slag waste (ASW) is generated per year. Ash dumps with such waste are constantly dusting; mobile ions of inorganic substances are washed away by precipitation, polluting the environment. Burned coals, being natural sorbents, contain impurities of many valuable elements, including rare-earth and precious metals, while their content in ash increases several times and can reach payable concentrations. Therefore, it is necessary to develop a technology for recovery of valuable components from ash and slag and using the remaining ash mass in construction and fertilizer industries. The efficiency of flotoextraction and chemical concentration methods for recovery of valuable components is assessed in the paper. The composition of the initial ash and slag samples and the resulting products of their processing were analyzed using infrared spectroscopic and optical emission methods.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.