| Issue |
E3S Web Conf.
Volume 303, 2021
The 10th Anniversary Russian-Chinese Symposium “Clean Coal Technologies: Mining, Processing, Safety, and Ecology” 2021
|
|
|---|---|---|
| Article Number | 01045 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/202130301045 | |
| Published online | 17 September 2021 | |
Selection of automatic vertical drilling system for the fourth section in Shunbei 11 well, Tarim basin, China
a College of Energy and Mining Engineering, Shandong University of Science and Technology, Qingdao 266590, China
b Petroleum Engineering Technology Research Institute of Sinopec Northwest Oilfield Company, Urumqi 830000, China
c Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao 266580, China
1 Corresponding: skd996020@sdust.edu.cn
Based on the introduction of the working principles of various automatic vertical drilling systems (VDS), the latter are divided into rotary push type and sliding push type. Then the technical advantages and applicable scope of various types of drilling tools are analysed. Combined with the latest domestic application progress and typical case analysis of the vertical drilling system, the future development direction of the vertical drilling technology is predicted. The results show that, the existing vertical drilling technology can better meet the technical needs of rapid drilling in the middle-deep sections with high steep angles. While the stability of wireless information transmission and wear resistance of the push pad still need further improvement. The new type of vertical drilling system that is miniaturized (suitable for small boreholes) and resistant to high temperature and high pressure is in urgent need to fill the gaps in the market segment. Domestic independent vertical drilling systems have made great progress, some even surpass foreign products in key indicators such as temperature resistance, in addition to achieving the technical goal of anti-inclination successfully. Finally, based on the engineering geological conditions of Shunbei 11 well, feasible vertical drilling tools were recommended and achieved engineering goal finally. The research results can provide support for the drilling company to optimize the vertical drilling system based on engineering-geological conditions.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.