Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
---|---|---|
Article Number | 01106 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202130901106 | |
Published online | 07 October 2021 |
Effect of Sugarcane Bagasse Fibre on the Behavior of Geopolymer Concrete under Sulphate Attack
1 Professor, GRIET, Hyderabad, India.
2 P.G. Student, GRIET, Hyderabad, India.
3 Professor, JNTUH, Hyderabad, India.
The use of various fibres such as steel, glass, sugarcane bagasse, and others has a considerable impact on the fresh and hardened properties of concrete. Sugarcane bagasse fibre is a byproduct from the sugarcane industry that can be reused as a concrete fibre. This paper objective is to work on the behaviour of sugarcane bagasse fibre on low calcium fly ash and slag based geopolymer concrete of G40 which is equivalent to M40 grade, when it is exposed to 5% sulphate attack with the help of experiments. The specimens were casted, GPC and GPCF Cured in an oven at 60 ° C for 24 hours, then let to cure in the atmosphere until the test is complete. After 28 days, the specimens were immersed in sulphates such as Na2SO4 and MgSO4 for 15, 45, and 75 days, and then tested according to codal standards on 15, 45, and 75 days. The comparisons were made in a controlled concrete environment (CC), controlled concrete with sugarcane bagasse fibre (CCF), geopolymer concrete (GPC) and geopolymer concrete with sugarcane bagasse fibre (GPCF). From the results it is observed that CCF and GPCF showed more resistant than CC and GPC when it is subjected to sulphate attack.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.