Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
---|---|---|
Article Number | 01120 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/202130901120 | |
Published online | 07 October 2021 |
Control Techniques for the Cascaded and Cross-switched Multilevel Inverter - A Comparison
Department of Electrical and Electronics Engineering. Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad, India
* Corresponding author: sameera.250@gmail.com
Nowadays, the multilevel inverter has gained huge attention and has become more popularized in high voltage and high-power applications with low harmonics. As the number of output voltage increases, the harmonic content of the output voltage waveform decreases. In this paper, a comparison of cascaded H-bridge and cross-switched multilevel inverters for 7, 9, 15, 21 levels will be carried out. The different control techniques that will be used for carrying out comparisons are space vector pulse width modulation (SPVPWM), sinusoidal pulse width modulation (SPWM), and third harmonic injection pulse width modulation (THI-PWM) respectively. Here, the seven-level inverter is discussed mainly and can be extended to any number of levels.
Key words: Multilevel Inverter / Total Harmonic Distortion / Sinusoidal Pulse Width Modulation / Third Harmonic Injection Pulse Width Modulation / Cross-Connected / Total Standing Voltage
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.