E3S Web Conf.
Volume 309, 20213rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|Number of page(s)||4|
|Published online||07 October 2021|
Effect of joint rigidity on structural behavior of RC buildings
1 M.Tech Scholar, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
2 Assistant Professor, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
3 Professor, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
4 Associate Professor, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
Non-linear static analysis or pushover analysis is now-a –days generally preferred by many researchers to analyse the non-linear behaviour of the structure. Present study includes the effect of joint rigidity on the behaviour of the structure. A building is modeled with 5 and 10 story and designed for gravity and earthquake resistant loads by considering joint rigidity factor as 0 and 1. The analysis is done in both X and Y directions by using pushover analysis in SAP2000 software. Comparison is made between then capacity curves obtained from designed models of rigidity and non-rigidity models. From the results it is concluded that structure designed using joint rigidity has more strength when compared non-rigid joints.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.