| Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
|---|---|---|
| Article Number | 01205 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202130901205 | |
| Published online | 07 October 2021 | |
Comparative study on aerated concrete using steam curing and conventional curing method
* PG student, Civil Engineering Department, GRIET, Hyderabad, India.
1 Professor, Civil Engineering Department, GRIET, Hyderabad, India.
Aerated concrete is made by introducing gas into concrete, the number dependent upon the necessities for strength. One methodology to attain this can be by utilizing Al Powder that reacts with the lime made upon association of the cement. The aim of the present study was to research the comparison between the steam curing method and the conventional curing method. The results specified that a rise in powdered aluminium content caused a decrease within the compressive strength, and an increase in change in volume when the aluminium powder is increased.
Key words: Aerated Concrete / Aluminium powder / Conventional curing / Aerated concrete / Change in volume
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.