Issue |
E3S Web Conf.
Volume 315, 2021
VIth International Innovative Mining Symposium
|
|
---|---|---|
Article Number | 01014 | |
Number of page(s) | 8 | |
Section | Environment Saving Mining Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202131501014 | |
Published online | 28 October 2021 |
Application of the RRSB, Pogosov, and Weining functions to describe the cumulative size characteristics of anthracites from the Krasnogorsky Mine
T.F. Gorbachev Kuzbass State Technical University, Department of Mineral Processing, Vesennyaya st., 28, 650000 Kemerovo, Russian Federation
* Corresponding author: uvi@kuzstu.ru
Many researchers have found that the nature of the grain size distribution makes it possible to assume the regularity of such a distribution, despite the difference in the physical properties of minerals. There are quite a large number of approximating functions for describing the regularities of the separation of coal and mineral complexes by size, obtained experimentally. There is a need to develop a new methodological approach and tools for selecting the best approximation function. The paper presents the results of predicting the total size characteristics of anthracites of the Krasnogorsky mine by the RRSB, Pogosov, and Weining functions. The quality of the approximation is estimated by the value of the standard deviation. It is established that the Weining formula allows us to calculate with a minimum error the granulometric composition of anthracites of the named deposit in the range of fineness from 0 to 150 mm.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.