| Issue |
E3S Web Conf.
Volume 351, 2022
10th International Conference on Innovation, Modern Applied Science & Environmental Studies (ICIES’2022)
|
|
|---|---|---|
| Article Number | 01054 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202235101054 | |
| Published online | 24 May 2022 | |
A new design of 5G planar antenna with enhancement of the bandwidth and the gain using metasurface
Laboratory of Technology of Information and Communication National school of Applied Sciences ENSA of Tangier, Abdelmalek Essaadi University, Tetouan Morocco
* Corresponding author: bellekhiri84@gmail.com
This work presents and describes the design of a novel multilayer antenna structure based on metasurfaces for 5G mobile applications. The suggested antenna has good matching input impedance around 28 GHz, a bandwidth of 2.2 GHz, and an enhancement of gain in comparison with standard patch antenna. This antenna is mounted on two substrates; the first one is the foam, and the second is Roger’s substrate suitable for 5G mobile applications. The whole dimensions of the final circuit are 3.28x4.23mm2. The proposed antenna structure has a high gain, good matching of input impedance and an aperture angle of 57 ° which is more directive compared to the rectangular antenna element.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.