E3S Web Conf.
Volume 352, 20227th International Conference on Energy Science and Applied Technology (ESAT 2022)
|Number of page(s)||5|
|Section||Fossil Energy & Geological Engineering|
|Published online||27 June 2022|
Research and effect analysis on improving injection mode of weak alkali ASP flooding in poor oil layer block
No.2 Oil Production Plant of Daqing Oilfield Co., Ltd., Daqing, Heilongjiang, 163414, China
In view of the large proportion of thin and poor layers in the weak-alkali ternary flooding block, the statistical analysis method is used to optimize the division of well groups with injection capacity, establish a strategy chart for different types of groups to maintain injection and tap potential, and optimize the well groups of different sand body connectivity types. The fracturing method strengthens the whole process of fracturing in the well area with poor injection capacity. The effective thickness water absorption ratio is over 80%, the maximum water cut reduction in the stage is 9.65%, the low water cut stable period is 16 months, and the recovery factor is increased by 8.77 percentage points. development effect.
Key words: Thin and poor oil layer / weak base ternary flooding / injection capacity / fracturing method
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.