Issue |
E3S Web Conf.
Volume 352, 2022
7th International Conference on Energy Science and Applied Technology (ESAT 2022)
|
|
---|---|---|
Article Number | 01038 | |
Number of page(s) | 8 | |
Section | Fossil Energy & Geological Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202235201038 | |
Published online | 27 June 2022 |
Demonstration Zone of “Water Control and Efficiency Improvement” in Area 1 of Laxi Block Study on fine liquid splitting method
Geological Research Institute of No.6 Oil Production Plant of Daqing Oilfield Co., Ltd.) Daqing 163000, Heilongjiang
Lamadian Oilfield has entered the late stage of ultra-high water cut development, and the producing conditions of each sublayer are different. In order to know the producing conditions of each sublayer more clearly, it is necessary to count the reserves and output conditions of each sublayer. Therefore, it is necessary to finely divide the liquid and oil production of each sublayer of the production well. The former liquid splitting method only considered the formation influencing factors, that is, the splitting method of formation coefficient, which could not meet the differences of different water cut in each sublayer at present. Through the research of fine liquid splitting method, we can clearly understand the production of each oil well layer in the block, the production status and adjustment potential of each sub-layer, thus guiding the adjustment and tapping potential of block layering measures. It provides a theoretical basis for the later development of ultra-high water cut block.
Key words: Water control and efficiency improvement / Liquid volume splitting / Zone 1 of Labei West Block
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.