| Issue |
E3S Web Conf.
Volume 352, 2022
7th International Conference on Energy Science and Applied Technology (ESAT 2022)
|
|
|---|---|---|
| Article Number | 02018 | |
| Number of page(s) | 4 | |
| Section | Clean Energy Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202235202018 | |
| Published online | 27 June 2022 | |
Two-tier power planning considering capacity tariff compensation
State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources (North China Electric Power University), Changping District, Beijing 102206, China
* Corresponding author: wangsixian0211@163.com
Faced with a high proportion of new energy power systems in the future, thermal power units will become the main peaking power source, and the reasonable recovery of their capacity value will become a focus of attention. To plan the power supply structure while considering the capacity tariff of thermal units and support the development of low-carbon energy, this paper proposes a two-tier power supply planning model that coordinates the scenery-to-fire ratio with the capacity tariff and proposes a capacity compensation mechanism for thermal units based on the effective capacity. With the gradually increasing ratio of scenery to fire, the capacity tariff compensation for thermal power units will be on the rise, providing a reference for the coordinated development of power supply planning and power market under the high proportion of new energy.
Key words: Power supply planning / capacity compensation / scenery-to-fire ratio
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.