Issue |
E3S Web Conf.
Volume 356, 2022
The 16th ROOMVENT Conference (ROOMVENT 2022)
|
|
---|---|---|
Article Number | 05058 | |
Number of page(s) | 4 | |
Section | Indoor Air Quality and Airborne Contaminants | |
DOI | https://doi.org/10.1051/e3sconf/202235605058 | |
Published online | 31 August 2022 |
Influence of the purification system of machining factories on indoor air quality
Tianjin Key Laboratory of Indoor Air Environmental Quality Control, School of Environmental Science and Engineering, Tianjin University, Tianjin 300072, China
* Corresponding author: longzw@tju.edu.cn
High-concentration oil mists from machining plant equipment can cause serious health problems for workers. The concentration of oil mist is generally reduced by ventilation and purification systems. However, the coupling relationship and interaction between purification and ventilation systems are not well understood. This study is based on an actual machining factory. First, the CFD simulation method was validated by the experimental data. Secondly, the influence of purifier exhaust air and exhaust air direction on oil mist distribution was studied. The results show that the influence of purifier exhaust air cannot be ignored in the prediction of oil mist concentration distribution. The difference in oil mist concentration and oil mist removal efficiency was 24% and 20%, respectively, with and without the purifier exhaust. Compared with the vertical exhaust direction of the purifier, the purifier with horizontal exhaust has fewer areas with higher oil mist concentrations. However, for the oil mist concentration at 1.5 m above the floor, the vertical exhaust air of the purifier is 0.1 mg/m3 lower than the horizontal exhaust air, and the removal efficiency is increased by 6.9%
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.