| Issue |
E3S Web Conf.
Volume 358, 2022
5th International Conference on Green Energy and Sustainable Development (GESD 2022)
|
|
|---|---|---|
| Article Number | 01037 | |
| Number of page(s) | 5 | |
| Section | Invited Contributions | |
| DOI | https://doi.org/10.1051/e3sconf/202235801037 | |
| Published online | 27 October 2022 | |
Design of Underwater Grinding Device for Nuclear Power Plant
1 Daya Bay Nuclear Power Operations and Management Co., Ltd., Guangdong, China
2 China Nuclear Power Operations Co., Ltd., Guangdong, China
3 China Nuclear Power Technology Research Institute Beijing Division, Beijing, China
* Corresponding author: fujianpeng@cgnpc.com.cn
In order to solve the problems of difficulty in cleaning the inner wall of the hammer-shaped component in the RIC system of the nuclear power plant and the low surface accuracy after cleaning, a profiling cleaning system was designed. First, the working principle of profiling cleaning is introduced to ensure that the surface accuracy after cleaning meets the installation requirements. Secondly, in order to ensure the normal operation of the profiling airbag, a mechanical model between the air supply volume of the air pump and the force on the conical inner wall is derived. Finally, in order to accurately control the output torque of the motor, the PID method is used to control the output torque of the motor. The system can increase the success rate of cleaning the inner wall of the hammer-shaped component in the RIC system and improve the efficiency of nuclear power plants.
Key words: Copying cleaning system / Nuclear power plant / Air bag stress model / PID control
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.