Issue |
E3S Web Conf.
Volume 371, 2023
International Scientific Conference “Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East” (AFE-2022)
|
|
---|---|---|
Article Number | 01012 | |
Number of page(s) | 7 | |
Section | Smart Farming and Precision Agriculture | |
DOI | https://doi.org/10.1051/e3sconf/202337101012 | |
Published online | 28 February 2023 |
Obtaining a filter material used in gas and air purification
1 Tashkent State Technical University named after Islam Karimov, 100095 Tashkent, Uzbekistan
2 Tashkent chemical technological institute, 100011 Tashkent, Uzbekistan
* Corresponding author: comfort_oil@mail.ru
Modern technologies allow obtaining small diameter fibers used for fine filtration. Combined layer filter materials are made from such fibers. Nanofibers from 20 to 200 nm are actively used as components of filter materials. They are made of synthetic (polyamides, polyesters, aromatic polyamides, polyacrylates), biological (proteins, collagen) materials and activated carbon. According to their effect, they are similar to reverse osmosis membranes (they retain large anions, Ca, Mg cations, heavy metal ions, large organic compounds) and at the same time allow obtaining membranes with high permeability for small sodium ions. It is known that one of the main problems of environmental protection is the reduction of atmospheric pollution. Every year, a large amount of harmful compounds - oxides, various metal compounds, as well as sulfur dioxide and nitrogen oxides, volatile organic compounds, stable organic compounds and acids are released into the atmosphere. The results of the study of the influence of the composite composition and the method of obtaining a filter material on its filtration properties and main indicators are presented.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.