| Issue |
E3S Web Conf.
Volume 464, 2023
The 2nd International Conference on Disaster Mitigation and Management (2nd ICDMM 2023)
|
|
|---|---|---|
| Article Number | 01011 | |
| Number of page(s) | 7 | |
| Section | Disaster Monitoring and Mitigation | |
| DOI | https://doi.org/10.1051/e3sconf/202346401011 | |
| Published online | 18 December 2023 | |
Risk mitigation plan for startup company Aplikasi Kriya Pratama
1 Industrial Engineering Department, Universitas Andalas, Padang, Indonesia
2 Economics Department, Universitas Andalas, Padang, Indonesia
3 Electrical Engineering, Faculty of Electricity and Renewable Energy, Institut Teknologi PLN, Indonesia
4 Department of Information Technology Faculty of Computing & Information Technology in Rabigh King Abdulaziz University, Saudi Arabia
* Corresponding author: primafithri@eng.unand.ac.id
A startup is an institution that develops new, technology-based innovative products. PT Aplikasi Kriya Pratama is a startup company operating in the fields of education and health tech businesses. Typically, startup companies are still in the development stage, and as a result, many of these startups experience failures. Therefore, risk management is necessary, involving the identification of uncertainties, risks, and potential impacts that may occur at PT Aplikasi Kriya Pratama in the education field. The purpose of this research is to propose prioritized risk mitigation actions at PT Aplikasi Kriya Pratama. The methods used to assess risks are Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA). FMEA is a structured procedure for identifying and preventing as many failure modes as possible, while FTA is a technique commonly used for studies related to the reliability risk of an engineering system. The expected outcome of this research is to assist PT Aplikasi Kriya Pratama in reducing the exposure to prioritized risks that could potentially impact the company.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.