Issue |
E3S Web Conf.
Volume 375, 2023
8th International Conference on Energy Science and Applied Technology (ESAT 2023)
|
|
---|---|---|
Article Number | 01053 | |
Number of page(s) | 6 | |
Section | Fossil Energy & Geological Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202337501053 | |
Published online | 27 March 2023 |
Study on the influence of different key parameters on EOR in LB block
1
Jidong Oilfield Company, PETROCHINA,
Tangshan, China
2
Northeast Petroleum University,
Daqing, China
The high temperature reservoir is in the high water cut stage after long-term development, and the inefficiency or invalid circulation caused by injected water is aggravated. With a long development history, the well pattern has been adjusted many times, and the remaining oil distribution is highly dispersed. Based on the high-temperature reservoir conditions of the target block, the influence analysis of different key parameters on EOR effect of LB- block was carried out. The gas flooding and chemical flooding potential were evaluated by numerical simulation method, and the EOR effect of different oil flooding systems was defined. The gas flooding and binary flooding numerical models were established according to the well pattern, reservoir and fluid physical parameters. The development effect is predicted under different formation dip, reservoir permeability, oil viscosity, oil saturation, effective thickness and reservoir temperature. The simulation results show that the key factors of EOR in gas flooding and binary flooding are formation dip.
Key words: reservoir permeability / reservoir thickness / viscosity / formation dip / EOR
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.