E3S Web Conf.
Volume 376, 2023International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|Number of page(s)||7|
|Section||II Environmental and Agricultural Engineering|
|Published online||31 March 2023|
Development of a New Blended Fabric on the RIFA-RFJW-10 Machine and Performance Analysis
Tashkent Institute of Textile and Light Industry, 5, Shohjahon str., 100100 Tashkent province, Uzbekistan
* Corresponding author: email@example.com
Effective condition for obtaining high-quality underwear fabrics with the required physical and mechanical properties is the formation of tissues of the required structure and structure. It should be noted that it is the improvement of the structure parameter and the change in tissue structure that makes it possible to improve them in the first place. In this article, it is stated that one of the textile products necessary for the daily life of the people of the whole world is bed linen, that there is a lot of demand for it, that it is widely used by all people regardless of the conditions, and the requirements of physical-mechanical, hygienic and technological characteristics are given to them. In addition, it is noted that fabrics intended for bed linen should be woven in linen or satin weaves, linens in linen weave should be light, soft and have an uneven surface, and sheets in satin weave should be smooth, coolness and air permeability are lower than linen, but they are pleasant in the process of relaxation. The results of an experimental study conducted at the "Urgut Textile" enterprise, comparing 100% polyester fabric with 100% polyester, 40% hemp yarn and 60% cotton fabric, are presented.
Key words: warp / weft / linear density / bedding fabric / fabric density / breaking load / breaking elongation / abrasion resistance / breathability, etc
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.