| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 05014 | |
| Number of page(s) | 5 | |
| Section | Chemical, Ecological, Oil-and-Gas Engineering and Natural Resources | |
| DOI | https://doi.org/10.1051/e3sconf/202454805014 | |
| Published online | 12 July 2024 | |
Analysis of the physical-mechanical properties of t-shirt fabric with different fiber composition
1 Bukhara Engineering-Technological Institute. Bukhara, Uzbekistan
2 Tashkent Textile and Light Industry Institute, Tashkent, Uzbekistan
* Corresponding author: muminovqodir1980@gmail.com
The physical and mechanical parameters of shirt fabrics with different fiber composition are analyzed in the article. According to the analytical results, the results of the penetration, breaking strength, breaking elongation, wrinkle resistance, air permeability, friction resistance of shirt fabrics after washing are presented, and the changes of the results of these indicators are described in the graphs. According to the analytical results, it was determined that the quality of shirting fabrics is affected not only by its fiber composition, but also by its weaving. As a result of the comparative analysis of physical and mechanical parameters of fabrics with different fiber content in six options, it was found that the fabric with 35% polyester and 65% cotton fiber content in option 4 is higher than other options. In textile enterprises, it is recommended for the production of shirt fabric of the fourth option, which has high air permeability, high strength, no wrinkling, and low shrinkage after washing.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.