Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
---|---|---|
Article Number | 04031 | |
Number of page(s) | 6 | |
Section | IV Environmental Impact of Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202337604031 | |
Published online | 31 March 2023 |
Development of an automated sand supply system for places of technical inspection of locomotives
Krasnoyarsk Rail Transport Institute, a branch of Irkutsk State Transport University, 660028, Krasnoyarsk, Russia
* Corresponding author: slavaotomilov22@gmail.com
To increase labor productivity is one of the most important tasks of the branch strategic document of JSC "Russian Railways". The article describes the existing system of sand supply to the locomotive at the places of technical inspection of locomotives (PTIL), its shortcomings are revealed. At present, this system has been outdated and it does not meet the requirements of the modern logistics and the organization of railway operation. To solve this problem, an automated system of sand supply to the locomotive based on a rotary level gauge and a slide gate with a pneumatic drive has been developed, which will eliminate the disadvantages of the typical system, which will increase labor productivity.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.