| Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
|---|---|---|
| Article Number | 05006 | |
| Number of page(s) | 8 | |
| Section | Reducing the Carbon Footprint of the Aviation | |
| DOI | https://doi.org/10.1051/e3sconf/202338305006 | |
| Published online | 24 April 2023 | |
Basic design and technological solutions for the application of automated layout processes in the manufacturing of composite parts of passenger aircraft
Moscow Aviation Institute (National Research University), Volokolamskoe shosse,4, 125993, Moscow, Russia
* Corresponding author: melkonyanrazmik@mail.ru
Currently, there are great perspectives for the technology of manufacturing products and aggregates from PCM based on prepregs. Thus, the use of prepregs makes it possible to manufacture complex configuration parts in one technological operation. High competition and the increasing necessity of mass production of large-sized parts from PCM determines the emerging need for the use of automated layout equipment. The replacement of traditional, manual methods of layout by automated methods provides significant advantages, such as an increase in the quality of the resulting parts, a significant reduction in labor intensity of their production, an increase in accuracy and repeatability of the technological process of layout (reduction of defects) and, consequently, reduction of the cost of the finished product.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.