Issue |
E3S Web of Conf.
Volume 388, 2023
The 4th International Conference of Biospheric Harmony Advanced Research (ICOBAR 2022)
|
|
---|---|---|
Article Number | 01024 | |
Number of page(s) | 4 | |
Section | Sustainable Infrastucture, Industry, Architecture, and Food Technology | |
DOI | https://doi.org/10.1051/e3sconf/202338801024 | |
Published online | 17 May 2023 |
Measurement Using the OEE Method and Design Using the Single Minute Exchange of Dies Method to increase Productivity in the Manufacturing Industry
1 Professor, Department of Industrial Engineering, Faculty of Engineering, Universitas Bina Nusantara, Jakarta, 11530
2 Professor, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, 16424
3 Department of Industrial Engineering, Faculty of Engineering, Universitas Bina Nusantara, Jakarta, 11530
4 Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, 16424
* Corresponding author: Taufik@binus.edu
The very rapid development of the manufacturing industry requires companies to be able to increase their productivity. Based on the analysis on the production machine, it is calculated that the Overall Equipment Effectiveness value is only 81%, this figure is still lower than the world class standard. What Affects Low OEE Value Is Performance and Machine Setup and Machine Downtime. This Repair Is Done Using Implementation Design of the Single Minute Exchange of Dies Method by Separating Internal and External Setups, Changing Internal Setup to External. After Getting Improved Internal and External Settings, The Time Reduction Value Is 30%, So It Can Improve Production Performance in The Manufacturing Industry.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.