| Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 5 | |
| Section | Bioenergy | |
| DOI | https://doi.org/10.1051/e3sconf/20186702005 | |
| Published online | 26 November 2018 | |
Optimizing a concentration of NaCl and 2Na2CO3∙3H2O with microbial desalination cell from the usage of UI lake water
Department of Chemical Engineering, Faculty of Engineering Universitas Indonesia, Depok 16424, Indonesia.
* Coresponding author: nana@che.ui.ac.id
Microbial Desalination Cell (MDC) is one of a Bio Electrochemical technology and also modification technology of Microbial Fuel Cell (MFC), MDC is a method that desalinate a sea water. In the use of this MDC system, the bio electrode that use is from coconut shell charcoal. The use of charcoal as Bio Electrode because it has a low cost as well as environmentally friendly, and charcoal doesn’t have some toxic properties. Another problem besides the use of bio electrode, is the imbalance between the pH and the chamber becomes another obstacle to the MDC system and the impact of some approaches leads to increased cost of capital and operational costs. In order to overcome these barriers by cost, Lake UI is used as the substrate and Sodium percarbonate (SP or 2Na2CO3∙3H2O) also used as a natural buffered electrolyte. Based on the results of variations of SP concentration, best concentration of SP was at 0.15 M (SR=15.14%), concentration NaCl at 35 g/L were able to reduce the mass of 3.626 g to 3.077 g with salinity 30.77 g/L.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.