| Issue |
E3S Web of Conf.
Volume 389, 2023
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2023)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 8 | |
| Section | Materials Science Innovations, Green Chemistry and Emission Reduction | |
| DOI | https://doi.org/10.1051/e3sconf/202338901006 | |
| Published online | 31 May 2023 | |
Mathematical modeling of milling cutters with variable radius for processing holes with an equiaxed contour
Southwest State University, 50let Oktyabrya 94, 305040 Kursk, Russia
The aim of the study is to model the cutting edges, front and rear surfaces, the pitch of the teeth and the cutting surface of a milling cutter with a variable radius for processing holes with an equiaxed contour. In the process of modeling, the method of compiling mathematical models of technological processes for obtaining surfaces of parts by cutting was used. As a result, the equations of the cutting edges of the milling cutter, the equations of the producing surface were obtained, parametric equations of the rear and front surfaces of the cutting teeth were constructed, and conclusions were drawn.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.